EQUIPMENT ACADEMY / CURTISS-WRIGHT / ACRA KAM-500

KAM-500 technician bench

Sixteen modules and a Bench Chief capstone: read exact part numbers, compare nearby candidates, place them in a candidate architecture, and know when controlled documentation is mandatory.

LOCAL TIME 06:07:24Z

OPTIONAL EQUIPMENT TRACK · RECOMMENDED PREREQUISITES

This bench assumes the foundations. Modules unlock in order as you complete their checkpoints; completed modules remain reviewable. Refresh any concept here:

KAM-500 AS ONE IMPLEMENTATION OF THE CANONICAL CHAIN · CLAIM PROVENANCE

CANONICAL MEASUREMENT CHAIN

One transferable model. Hardware may combine stages; an implementation never redefines the chain.

  1. MEASURAND
  2. SENSOR
  3. ELECTRICAL INTERFACE
  4. EXCITATION
  5. CONDITIONING
  6. CONVERSION / ADC
  7. TIME
  8. AGGREGATION
  9. TRANSPORT
  10. RECORD / TELEMETRY
  11. METADATA / ENGINEERING UNITS
  12. PROOF

Highlighted stages are where KAM-500 cards and controllers do the work in this course. The chain itself is vendor-neutral; KAM does not redefine it. Claim provenance below describes where a statement comes from; equipment maturity badges describe how deeply a product is covered — they are separate.

CLAIM PROVENANCE

FOUNDATION

Transferable measurement or DAU principle.

STANDARD

Claim tied to a named technical standard or reference.

MANUFACTURER

Claim bounded to the cited maker, product and revision.

WORKPLACE PROCEDURE

Local procedural context only; authority depends on the current workplace/program.

TEACHING ANALOGY

Simplification used to teach, never an engineering rule.

SIMULATION

Invented scenario or value for practice.

[CTRL]

Exact current controlled lookup required.

MODULE 01 / 16 · GUIDED MISSION

Read the Part Number

IN PROGRESS

01 · DISCOVER

Your mission

Start with the problem this lesson solves. Everything else builds on it.

MISSION HOOK

A spares box arrives labelled only with part numbers. The shift lead asks: "Which of these is a chassis, which is the controller, and which reads temperature?" The family clue gets you started — it never finishes the job.

EVIDENCE
A · Manufacturer VerifiedB · Instrumentation FundamentalC · Teaching SimplificationD · Simulation

TO CONTINUE: READ THE MISSION AND PRESS BEGIN

TECHNICAL DETAILS

Read the prefix (KAM = chassis-level/system items, KAD = plug-in modules in this teaching set), the family code, then the number, suffix and revision. Record the full string exactly; the data sheet lookup keys on it.

  • ›Family codes are a learning aid for this curated set, not a formal naming specification.
  • ›MEM, EXC and BIT appear with both KAM and KAD prefixes in the catalog set.
  • ›Suffix/revision behavior is always [CTRL].

Your place in this mission is remembered on this device for your account (or as a guest) so you can resume. It never counts as lesson completion — only the real checkpoints do. Stage and lesson locks guide learning; they are not a security boundary.

REFERENCES & SOURCES · TAP TO OPEN

TAG LEGEND

A · Manufacturer fact (exact cited part only)B · General instrumentation principleC · Analogy / teaching simplificationD · Simulated values / scenario[CTRL] · Exact current controlled lookup required
  • Supports: Part names/job family only: Family names as listed in the public catalog set. Any numeric attribute not shown here is [CTRL].

  • A · Manufacturer fact (exact cited part only)Curtiss-Wright KAD/ADC/113 and KAD/ADC/126 — public KAM-500 catalog

    Supports: Exact part only: quarter-bridge vs accelerometer catalog roles. Recognition/comparison data unless exact controlled documentation applies it.

  • B · General instrumentation principleEquipment Academy hard rule

    Supports: A family name never proves compatibility.

  • C · Analogy / teaching simplificationTeaching simplification

    Supports: Family-code decoder as a sorting aid.

  • D · Simulated values / scenarioKAM Workbench simulation

    Supports: Spares-box sorting scenario.

A applies only to the exact cited manufacturer part. Generic system principles are B, never "Manufacturer Verified".

The KAM-500 Equipment Academy is independent education, not affiliated with or endorsed by Curtiss-Wright. Published catalog values are recognition/comparison data only. Exact part number + revision wins; pinouts, aircraft wiring, excitation values, power budgets, firmware compatibility, environmental limits, slot restrictions, and network/PCM setup are controlled lookups — never taken from this course. Simulation is never engineering approval.