SYSTEMS LAB / AIRCRAFT-WIDE CAPSTONE

Aircraft-Wide Instrumentation Capstone

Fictional mission: eight measurements across four aircraft sections, four distributed DAU-style nodes, one synthetic timing distribution, one telemetry path and one onboard recorder. Build it, inject a fault, troubleshoot, and produce a scored verification report.

D · SIMULATION / C · TEACHING MODEL — Generic aircraft-wide architecture only. No real aircraft platform specs, TTC module-to-chassis compatibility, pinouts, proprietary settings or installation guidance. Every numeric budget is fictional. This visit only; course progress is unchanged.

Guided capstone · 8 stages

  1. 1. Mission brief
    Fictional mission and section map provided; not a reading assessment.
  2. 2. Assign measurements
    Every measurement has a node and channel.
  3. 3. Power & sync nodes
    Every used node is powered and clock-synchronized.
  4. 4. Timing master
    A timing master is selected.
  5. 5. Telemetry path
    Telemetry enabled and synthetic load within fictional budget.
  6. 6. Recorder
    Recorder connected to a node and armed.
  7. 7. Validate & troubleshoot
    Validation passes with zero issues after fault injection is cleared.
  8. 8. Run & verify
    Simulation runs and every reading moves end-to-end.

Verification score: 1 / 8 stages passed

01 / Sections & nodes

Node Nose D · FICTIONAL

Nose / cockpit

Node Nose address

Fictional capacity 3 channels.

Node Center D · FICTIONAL

Center fuselage

Node Center address

Fictional capacity 4 channels.

Node Aft D · FICTIONAL

Aft fuselage

Node Aft address

Fictional capacity 3 channels.

Node Wing D · FICTIONAL

Wing / landing gear

Node Wing address

Fictional capacity 2 channels.

Timing master

Recorder connected to

Synthetic telemetry budget: 20 tokens · current load 0 tokens (teaching values, not data rates).

02 / Measurement assignment

Pitot probe temperature B · INTERFACE FIRST

Section: Nose / cockpit · synthetic load 1

Pitot probe temperature node

Pitot probe temperature channel

Cockpit pressure (conditioned) B · INTERFACE FIRST

Section: Nose / cockpit · synthetic load 2

Cockpit pressure (conditioned) node

Cockpit pressure (conditioned) channel

Cabin vibration (charge) B · INTERFACE FIRST

Section: Center fuselage · synthetic load 4

Cabin vibration (charge) node

Cabin vibration (charge) channel

Fuel line pressure (bridge) B · INTERFACE FIRST

Section: Center fuselage · synthetic load 2

Fuel line pressure (bridge) node

Fuel line pressure (bridge) channel

Hydraulic pressure (bridge) B · INTERFACE FIRST

Section: Aft fuselage · synthetic load 2

Hydraulic pressure (bridge) node

Hydraulic pressure (bridge) channel

APU speed (pulse) B · INTERFACE FIRST

Section: Aft fuselage · synthetic load 1

APU speed (pulse) node

APU speed (pulse) channel

Gear strut strain (bridge) B · INTERFACE FIRST

Section: Wing / landing gear · synthetic load 2

Gear strut strain (bridge) node

Gear strut strain (bridge) channel

Avionics bus monitor B · INTERFACE FIRST

Section: Center fuselage · synthetic load 3

Avionics bus monitor node

Avionics bus monitor channel

03 / Validate, inject fault, run

Awaiting system validation.

04 / Live readings · D synthetic

IDLE · 0 simulated frames · t = 0.0 s

Source & evidence boundaries

A · MANUFACTURER: Only the general concept that chassis-based and miniature DAUs exist in public catalogs; no device claims.

B · FUNDAMENTALS: Aircraft-wide acquisition needs section placement, node identity, transport, shared time, telemetry and recording paths.

C · SIMPLIFICATION: Four fixed sections/nodes, one recorder, one telemetry path, section-local assignment preferred.

D · SIMULATION: Addresses, capacities, budgets, clocks, loads and readings are fictional.

[CTRL] · Exact parts, compatibility, protocols, pinouts, rates, timing, formats and aircraft installation require current controlled documents.